You are Here: FAQ ->Microsoft Exchange->Article #6


How do I add a new domain to my package?


To register a new domain:

1. Log in to the 1&1 Control Panel at: https://admin.1and1.com

If you have only one package, you will land on the Administration page.
If you have more than one package, select the relevant package to reach
its Administration page.


2. Select Domains from the Basic Settings section.
Domains

3. Click New.
new_domain2

4. Enter the domain name of your choice and click Check Domain.
new_domain3

5. If the domain is available, the following page will be displayed. After reading
the Terms and Conditions, check the box next to I have read and I accept the Terms
And Conditions For The Registration of Domain Names. Click Next.
new_domain4

6. Choose Public or Private Registration. (For more information on Private Registration click here Private Registration)
Click Next if the information is correct.
new_domain5

7. Check the domain name again and click Order.
new_domain6

8. A confirmation will be displayed.
new_domain7

Your new domain will be available in approximately 24 hours.


Print Article
How useful was this article?
(From 5 = Very Useful to 1 = Not useful at all):
1 2 3 4 5


 © 2008 1&1 Internet Inc - About 1&1 Internet